The RELX Infinity 2 represents a pinnacle in closed-pod system technology. While its predecessor, the original Infinity, set the standard for leak-resistance and ergonomic design, the Infinity 2 introduces a level of user customization rarely seen in the “plug-and-play” category.
To get the most out of this device, it is essential to understand its nuanced features—specifically the adjustable power modes, the intelligent LED interface, and the maintenance required to keep a high-performance pod system running smoothly.
1. Unboxing and Initial Preparation
Before you take your first puff, a few preliminary steps ensure the longevity of the battery and the quality of the flavor.
Charging the Device
The Infinity 2 features an upgraded 440mAh battery and supports Ultra-Fast Charging.
- The Cable: Always use the USB Type-C cable provided in the box.
- The Port: The charging port is located at the base.
- Charging Time: One of the standout features of the Infinity 2 is that it can reach an 80% charge in approximately 15 minutes. A full charge typically takes 27–45 minutes depending on the power source.
- Indicator: The LED ring on the front will pulse during charging and turn solid or shut off once the battery is fully topped up.
Preparing the Pod
The RELX Infinity 2 is compatible with RELX Pod Pro 2 cartridges. While it is backward compatible with older Infinity pods, the “Power Adjustment” feature only works with the Pro 2 pods.
- Remove Seals: Every new pod comes with a silicone plug in the mouthpiece and a plastic film on the base. Remove both.
- Wait Time: If the pod has been sitting in a cold environment, let it reach room temperature for a few minutes to ensure the e-liquid viscosity is optimal for the ceramic coil.
2. Operating the Adjustable Power Modes
The defining feature of the Infinity 2 is the ability to toggle between three distinct performance levels. This is done by clicking the small physical button located on the side of the device.
Mode 1: Eco Mode (Green Light)
- Wattage: Operates at a lower power setting (typically around 5.5W).
- Experience: This mode provides a lighter throat hit and smaller vapor clouds.
- Benefit: It is designed to stretch your battery life by up to 25%. This is ideal for when you are out for a long day and don’t have access to a charger.
Mode 2: Smooth Mode (Blue Light)
- Wattage: The standard setting (around 6.5W).
- Experience: This is the classic RELX experience—balanced flavor, consistent vapor production, and a smooth “Super Smooth” draw.
- Benefit: Ideal for everyday use. It mimics the performance of the original Infinity device.
Mode 3: Boost Mode (Purple Light)
- Wattage: The high-performance setting (around 8W).
- Experience: This provides a much warmer vapor, a more intense throat hit, and significantly bolder flavor.
- Benefit: Perfect for those who find standard pods too light or for those transitioning from heavy smoking who need a more “punchy” nicotine delivery. Note that this mode will consume e-liquid and battery life faster.
3. Understanding the LED Indicator System
The LED ring is your communication hub with the device. Unlike simpler models, the Infinity 2 uses colors and haptic (vibration) feedback to tell you what is happening.
- Pod Insertion: The device will vibrate once and the LED will flash when a pod is successfully magnetically seated.
- Battery Levels:
- White: Above 30% battery.
- Red: Below 30% battery (time to look for a charger).
- Smart Pace Alert: If you take more than 15 puffs within 15 minutes, the device will vibrate. This is a built-in feature to help users monitor their nicotine intake.
4. Proper Vaping Technique
To avoid common issues like “spit-back” (getting juice in your mouth) or “burnt hits,” follow these usage guidelines:
The “MTL” Draw
The Infinity 2 is a Mouth-to-Lung (MTL) device. This means you should draw the vapor into your mouth first, hold it for a second, and then inhale into the lungs—much like a traditional cigarette. Taking direct-to-lung (DTL) deep breaths can overwhelm the small ceramic coil and lead to leaking.
Angles Matter
Try to keep the device relatively upright while vaping. Vaping while lying down or holding the device horizontally can cause the e-liquid to move away from the internal heating element, leading to a “dry hit” (a burnt taste).
5. Maintenance and Troubleshooting
Even though the Infinity 2 is a closed-pod system, it still requires basic “hygiene” to function at 100%.
Cleaning the Contact Points
Over time, a small amount of condensation can build up inside the pod housing.
- Remove the pod.
- Use a cotton swab (Q-tip) or a rolled-up tissue to wipe the gold-plated contact pins inside the device.
- Wipe the bottom of the pod as well.If the device stops firing even when charged, dirty contacts are usually the culprit.
Leak Resistance
The Infinity 2 uses an 11-layer leak-resistant maze structure. However, extreme pressure changes (like flying on an airplane) or extreme heat (leaving it in a car) can cause some seepage. If you see liquid, wipe it away immediately to prevent it from entering the internal electronics through the airflow sensors.
Storage
If you aren’t planning to use the device for a few days, it is best to remove the pod from the device. This prevents any potential slow leaks from reaching the battery.
6. Comparison: Why Upgrade to Infinity 2?
If you are coming from the original Infinity or the Essential model, the Infinity 2 offers several technical advantages:
| Feature | RELX Infinity | RELX Infinity 2 |
| Charging Speed | 45-60 mins | 27-45 mins (Ultra Fast) |
| Power Modes | Fixed | 3 Levels (Eco, Smooth, Boost) |
| Battery Capacity | 380mAh | 440mAh |
| Interface | LED Pulse | LED + Button Control |
7. Safety Precautions
- Avoid Counterfeits: Only purchase pods that have the QR code authentication on the box. Counterfeit pods often use inferior coils that can burn easily or leak.
- Water Exposure: The Infinity 2 is not waterproof. If it falls into water, do not try to turn it on or charge it. Dry it thoroughly, but be aware that the internal sensors are highly sensitive to moisture.
- Charging Safety: Do not leave the device charging overnight. While it has overcharge protection, it is always safer to unplug electronics once they reach 100%.
8. Conclusion
The RELX Infinity 2 is designed to be effortless, but the addition of the Power Mode button transforms it from a basic tool into a customizable experience. By choosing Eco Mode for a night out, Smooth Mode for your work break, or Boost Mode for your morning coffee, you have total control over your nicotine delivery.
The key to a long-lasting device is simply keeping it clean and charged. With the 15-minute fast-charging capability and the robust leak-resistant pods, it remains one of the most reliable options for anyone looking for a premium, hassle-free vaping journey